SealMaster® pavement sealers are designed to protect and beautify your asphalt driveway or parking lot. Sealcoating prevents oxidation of the asphaltic binder, prevents weather damage, reduces maintenance costs and adds years of live to the pavement.
Sealcoating protects, saves and improves the appearance of your asphalt. It protects the surface from rain, snow, salt and other deteriorating elements, extending the lifetime. After asphalt sealcoating, the surface will appear a nice dark, black finish. Lastly, asphalt sealcoating will save you money as it extends the life of your asphalt and eliminates the need for expensive repaving.
New asphalt should cure a minimum of 30 to 60 days. Once the asphalt is free from oils and sufficiently cured you can apply the sealer.
You must have 50 degrees and rising for a 24 hour period.
You should not apply sealcoating if rain is imminent within a 24 hour period.
Please give the sealcoat 24 hours after the final coat to cure prior to opening back up to traffic.
Surfaces must be clean and free from all loose dirt and material. Pavement surfaces should be repaired with a suitable hot or cold asphalt mix. Cracks should be filled with SealMaster® hot or cold applied crack fillers. Treat all gas, oil or grease spots with SealMaster® PetroSealTM or PrepSealTM.
At Exit 7 Sealcoating we use a variety of products from the best brands in the industry for sealcoating asphalt and blacktop. Some of these include SealMaster®, PetroSealTM, PrepSealTM and Mastic Asphalt Crack Filler.
Pavement sealer can be applied by brush, squeegee, or specialized spray equipment. Equipment shall be capable of spraying sealer with sand added.
Coverage rates will vary based on the product. Follow the specification sheets for application rates. Apply two coats of sealer. A third coat might be applied to high traffic areas such as entrances, exits and drive lanes.
Additives can assist in speeding up the dry time for additional coats of sealer, as well as help with sand suspension and reduce power steering marks.
Yes, clean silica sand should be included in the mix design. Sand provides slip resistance, helps with drying and adds to the durability of the sealcoating material.
SealMaster® offers water-based asphaltic products and acrylic products that are environmentally and user-friendly.